查看: 2423|回复: 4
收起左侧

新的完整稳性横准

[复制链接]
发表于 2010-3-3 17:21 | 显示全部楼层 |阅读模式 来自: 澳大利亚
MSC267(85)将于2010-7-1实行,新的稳性横准同原来的A749有哪些不同,有兄弟研究过么。
回复

使用道具 举报

龙船学院
发表于 2010-3-4 07:50 | 显示全部楼层 来自: 中国山东济南
diffirence between A267(85) A749(18)
1.maximum righting lever shall occur at angle of heel not less than 25 degree.if this is not parcticable,alternative crteria,based on an equivalent level of safty,may be applied subject to the approval of the administration.(in A267(85) part A,chapter 2.2.3)
the maximum righting arm should occur at an angle of heel preferably exceeding 30 degree but not than 25 degree.(in A749(18) part A,chapter 3.1.2.3
2.from the resultant angle of equilibrium (0), the ship is assumed to roll owing to wave action to an angle of roll (1) to windward. The angle of heel under action of steady wind (0) should not exceed 16 or 80% of the angle of deck edge immersion, whichever is less;(in A267(85),part A,chapter 2.3.1)
  the angle of heel under action of steady wind should be limited to a certain angle to the satisfaction of administration.as a guide,16 degree or 80% of the angle of deck edge immersion,wiich is less,is suggested.(in A749(18),part A,chapter 3.2.2.1)
回复 支持 反对

使用道具 举报

 楼主| 发表于 2010-3-4 14:52 | 显示全部楼层 来自: 澳大利亚
多谢多谢
回复 支持 反对

使用道具 举报

发表于 2010-3-5 12:19 | 显示全部楼层 来自: 中国台湾
多谢多谢
回复 支持 反对

使用道具 举报

发表于 2012-10-3 10:45 | 显示全部楼层 来自: 中国江苏南通
及时看到了,哈哈{:3_51:}
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-9-21 18:38

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表