查看: 1675|回复: 4
收起左侧

[船装] 船用人孔盖

[复制链接]
发表于 2009-4-23 11:00 | 显示全部楼层 |阅读模式 来自: 中国山东烟台
各位大虾,请问船用人孔盖要船级社正书吗?什么样的证书?7万吨散货船项目!!!
回复

使用道具 举报

龙船学院
发表于 2009-4-23 11:04 | 显示全部楼层 来自: 中国浙江温州
工厂生产形式认可一般就可以了。
具体见持证清单
回复 支持 反对

使用道具 举报

 楼主| 发表于 2009-4-24 08:54 | 显示全部楼层 来自: 中国山东烟台

回复 2楼 不会糙船 的帖子

谢谢,好像在液舱(IG压载舱) 需要 形式认可或产品证书
回复 支持 反对

使用道具 举报

 楼主| 发表于 2009-4-24 08:59 | 显示全部楼层 来自: 中国山东烟台
Refer IACS REC_2_Type of hatch cover required if a lower deck is designated as the freeboard deck

Type of hatch cover required if a lower deck is designated as the freeboard deck (Regulations referred to in this Recommendation correspond to those of the International Convention on Load Lines, 1966) Regulation 27(6) requires Type B ships assigned freeboards in accordance with Table B of Regulation 28 to be fitted in Position 1 with hatchcovers complying with the requirements of Regulation 15(7) or 16, i.e. steel hatch covers. In the event that the second deck is nominated as the freeboard deck in accordance with Regulation 3(9), then such steel hatchcovers would be required in the forward quarter length of the upper deck (Regulation 13 refers). However, if the vessel was considered with wood hatchcovers throughout the exposed upper deck and this deck was used as a freeboard deck, then the freeboard calculated in accordance with Regulation 27(10) would give considerably greater draught than if the second deck were nominated. It is agreed that this anomaly in the Rules should be accepted as written.
回复 支持 反对

使用道具 举报

发表于 2009-11-7 15:44 | 显示全部楼层 来自: 中国上海
楼主注意了现在无论什么都是要证书认可的!!!!
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-11-15 20:36

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表