窗与舷窗布置区别

unmost

大家好，请问窗跟舷窗在布置上有什么区别吗？什么情况下用窗，什么情况下用舷窗？另外在有些船上还要求窗户还要配风暴盖，这是为什么。舷窗可以布置在干舷甲板以上多高，谢谢？

命犯孤星

帮顶，等知道的

太躺你棵

有线型的地方用舷窗，风暴盖规范有要求！估计是这样？？？

ronan951441

风暴盖一般主甲板和艇甲板上用的吧。上面几层很少见。主甲板上一定要用舷窗，主甲板以上有的可以用普通窗。

wuweimin

规范里面有，找找看

kingzhime

不知道，等学习。。。。

天天造船

定义不一样：
舷窗为面积不超过0.16平方米的圆形或椭圆形开口。
窗为一般呈方形开口，其每个角隅有一个与方窗过渡的圆弧，以及面积超过0.16平方米的圆形或椭圆形开口
具体位置查LOAD LINE

wflcc

7楼正解，我们的平台在水密分割线下侧的窗，DNV要求用舷窗，而且要加风暴盖，原因是海浪的拍击力很大哦

Sammy_Wang

学习一下！

jimmy28

7 楼说的好

找回打酱油的

简单载重线公约一看就明白 去查吧

wy95518

ABS2013 part 3-2-17-9.3规定第2-4层以上的窗都要带风暴盖，风暴盖装在外面，除非装不了。

wy95518

9 Windows
9.1 Construction (1 July 2012)
Windows are defined as being rectangular openings, or round or oval openings, with an area exceeding 0.16 m2.
Windows may only be fitted in the following locations:
i) In front bulkheads of deckhouse and superstructures, in the second tier and higher above the freeboard deck. In the first tier of front bulkheads above the weather deck portlights are acceptable.
ii) In the after end bulkheads and sides of deckhouses and superstructures in the second tier and higher tiers.
iii) In first tier deckhouses that are not considered buoyant in the stability calculations and that do not protect openings leading below.
Portlights are required in locations not specified above.
Window frames are to be metal or other approved material and secured to the adjacent structure. Window cutouts are to have a minimum of 6.5 mm (0.25 in.) radius at all corners and the glazing is to be set into the frames in an approved, flexible seawater and sunlight resistant packing or compound. Special attention is to be paid to the windows installed in angled deckhouse fronts.

Jack特

天天造船 发表于 2014-1-4 11:50
定义不一样：
舷窗为面积不超过0.16平方米的圆形或椭圆形开口。
窗为一般呈方形开口，其每个角隅有一个与 ...

窗和舷窗的区别界限在0.16m2,窗是方的，舷窗是圆的

schofield

窗是方的，舷窗是圆的

yhj1081

舷窗是窗的一种，舷窗装的位置跟载重线有关

TGYH

去找本载重线公约1988修正案看看，里面有一条专门讲窗与舷窗。