启动PLANAR HULL时，会气死个人哦

highbrother · 发表于 2010-3-14 21:06

一启动PLANAR HULL，就崩崩崩跳出下面这些东西，看到Failure就头痛，望高手解决解决，麻烦说得详细点，小弟跪谢了！！
Failure opening WCOG Drawing Data Bank (SBH_WCOG_DWG). SBH_RECEIPT is used
Failure opening Partlist Drawing Data Bank (SBH_PARTLIST_DWG). SBH_RECEIPT is used
Failure opening Profile Sketch Data Bank (SBH_PSKETCH_DWG). SB_PDB is used
Failure opening Nested Profile Sketch Data Bank (SBH_NSKETCH_DWG). SB_PDB is used
Failure opening Plate Jig Drawing Data Bank (SBH_PLJIG_DWG). SBH_RECEIPT is used
Failure opening Part Receipt Drawing Data Bank (SBH_PPART_DWG). SBH_RECEIPT is used
Failure opening Curved Part Receipt Drawing Data Bank (SBH_CPART_DWG). SBH_RECEIPT is used
Failure opening Pin Jig Drawing Data Bank (SBH_PINJIG_DWG). SBH_RECEIPT is used

黑鹰展翅 · 发表于 2010-3-15 21:32

楼主大问题啊，我也期待中

x1008yb · 发表于 2010-3-16 07:24

工程D065没有配置好，软件读取不到数据库

HULL1 · 发表于 2010-3-16 09:09

Because the uncompleted databank.

HULL1 · 发表于 2010-3-16 11:22

Because of the uncompleted databank. you can use the control panel to creat the missing data file matching with D065.

zhjames · 发表于 2010-3-17 15:17

呃.........没有装成功，不知道怎么搞的

missyou870905 · 发表于 2014-8-13 22:00

我也遇到了同样的问题，请问谁能帮忙解决一下

楚河饮马 · 发表于 2014-9-12 09:04

不是什么大问题，可以忽略。当然，也可以解决，看d065文件中这几个库的路径，复制几个空数据库再重命名就搞定了

楚河饮马 · 发表于 2014-9-12 09:06

是数据不完备，楼上说的基本不靠谱。

楚河饮马 · 发表于 2014-9-12 09:06

数据库……

[其他] 启动PLANAR HULL时，会气死个人哦