pipe modelling出小票中出现问题了

xiee · 发表于 2009-11-6 07:57

把管子设置当前的时候提示

pipe XXXX-xxxxx-sd28 is ready , activate anyway

yes 之后 ready

Indicate pipe
Current is xxxx-xxxx-sd28.!
Choose function
R: Non connected connection!
W: User given excess!
Q: Last flange, no autoweld!
xxxx-xxxx-sd28 stored in the data bank.!
Starting pipe splitting for sD28!
Background job sbPC-200908250700_182_1 started OK!
Choose function

之后也没有跳出那个窗口提示

但是在drafting 里却找不到任何小票

请问这个如何解决谢谢

xiee · 发表于 2009-11-6 08:02

sbPC-200908250700_182_1的log 信息

--------------------------------

WP711 - PIPE NAME:    xxxx+xxxx+sd28
WP711 - SKETCH NAME: 1
WP640 - TRANSFERING PART:          -1005
WP640 - TRANSFERING PART:          -1002
WP640 - TRANSFERING PART:          -1001
WP640 - TRANSFERING PART:          -1003
WP640 - PART TRANSFER READY
WP640 - REFERENCE POINTS TREATMENT READY
WP640 - MATERIAL LIST CREATED
WP640 - UPDATING PRODUCTION ATTRIBUTES
WP643 - PART ID:          -1005
WP643 - PART ID:          -1003
WP640 - PRODUCTION ATTRIBUTES UPDATED
WP640 - OBJECT HEAD DATA COLLECTED
WP640 - OBJECT HEAD DATA STORED
WP640 - MAKE CURRENT xxxx=xxxx=sd28 xxxx=xxxx=sd28       0
-1003             0
WP640 - CURRENT       2
WP650 - ERROR RETRIEVING FORM:       1
%SBB-I-SBERR, Error report, QERROR=  4803
PPDB - Error in reading drawing form
Error 4803 reported from procedure 6650 (WP650 )
PPDB - Error in reading drawing form
Error 4803 reported from procedure 6711 (WP711 )

sbPC-200908250700_182_1
%SP600-E-UNDEFKEYWVAL, Undefined keyword value \锘縊BJLOCK\ in default file, Line: 1
      1 PROJECT,'xxxx';
      2 SPLIT/MOD='xxxx'/SUB=('sd28');
%SP600-E-SBERROR, SB-error \4803\.

AVEVA AB                               Splitting list                                           Page 1
                                          2009-11-06 07:56:37

   SPLIT:
   ======
   xxxx          xxxx       sd28

xiee · 发表于 2009-11-7 13:16

右人知道么顶一下谢谢

更多的思考 · 发表于 2009-11-7 20:41

小票图框没有正确连接。系统找不到图框。

xiee · 发表于 2009-11-8 13:19

请问如何连接图匡呢？

godson1114 · 发表于 2009-11-8 17:14

5# xiee

应该是先定义个DRAW FORM,关于from 的定义可以在帮助里面找到！主要是一些参数的问题！
而后在def 文件中定义(sp600) 先前做的from.那里面的参数帮助中可以找到！好运！

liuguangdi · 发表于 2009-12-14 22:32

xuexi

astroboy888 · 发表于 2010-9-19 17:18

还是你的配置文件出问题了！你按照提示一个一个的解决就没有问题了！

[其他] pipe modelling出小票中出现问题了