Machine No.
| Bending machine no (1 <= no <= 10)
|
Dy
| Outer diameter of the pipe.
|
Wall thickness
| Wall thickness of the pipe.
|
G-measure
| Shortest straight pipe between two bends.
|
L1-measure
| Minimum length of straight pipe between clutch and closest bend for a pipe without flange.
|
L2-measure
| Minimum length of straight pipe between clutch and closest bend for a pipe with flange.
If the possibility to bend a pipe with a flange does not exist in the current machine the value 100 000 should be given.
|
FC Measure
| Flange Correction Measure
|
Radius
| Radius/Dy of bending.
|
发表于 2007-11-6 18:28
提升卡
变色卡
楼主