试用期员工
- UID
- 3542
- 积分
- 300
- 金币
-
- 活跃
-
- 阅读权限
- 30
- 注册时间
- 2006-11-20
- 最后登录
- 1970-1-1
|
被comments 说一散货船的L型压载舱不符合SOLAS新的要求, 应该划分成一个底舱和一个边舱,规范如下:
--------------------------
SOLAS 06 Amend / II-1 / Reg. 9
Where a double bottom is required to be fitted the inner bottom shall be continued out to the ship's sides in such a manner as to protect the bottom to the turn of the bilge. Such protection will be deemed satisfactory if the inner bottom is not lower at any part than a plane parallel with the keel line and which is located not less than a vertical distance h measured from the keel line, as calculated by the formula:h = B/20
-----------------------------
根据规范,好像他的意见是对的,可问题是我在SOLAS2004里面看到类似的句子,为什么之前的货船很多都用L型舱呢?
--------------------------
SOLAS 04
ChapterII-1
Part B -SuBDIvision and stability
2. Where a double bottom is required to be fitted, its depth shall be to the satisfaction of theAdministration and the inner bottom shall be continued out to the ship's side in such a manner as toprotect the bottom to the turn of the bilge.
----------------------------
那个高手可以解一下惑??多谢了! |
|