锚链标记问题

行云流水108 · 发表于 2012-5-14 13:08

求ABS规范中锚链标记部分！

li-g-f · 发表于 2012-5-14 13:20

根据标准做就可以了

rock · 发表于 2012-5-14 20:55

Part 2_e.pdf (169.6 KB, 下载次数: 38) Marking for Chain (2001)  2-2-2/21
The shackles and the end links of each length and one link in every 27.5 m (15 fathoms) of stud-link
chain, made in a continuous length without joining shackles, are to be clearly s***ped by the
manufacturer as shown in 2-2-2/Figure 2 in location A, B and C. When Kenter shackles are used, the
marking is to be clearly s***ped on the Kent er shackle and on both adjoining common links.  Any
accessory tested to a break load for  a lower grade chain, as permitted in 2-2-2/23.13, is to be marked
with the grade of the chain to which it is tested.    见附件。

rexchang · 发表于 2012-5-15 13:55

楼上很好，顶

fengvhong · 发表于 2012-5-15 16:32

rock 发表于 2012-5-14 20:55
Marking for Chain (2001) 2-2-2/21
The shackles and the end links of each length and one link in e ...

嗯，很好！可惜我是英盲

zzy05 · 发表于 2012-11-16 15:29

试航抛锚后再确定高度才是正解！当然经验够丰富的老法师能够在码头就定好位（关键是掣链器要比锚机链轮和筒口链轮连线略高一些），试航再验证一下就行了。但是这需要经验老到才行。

李正敏 · 发表于 2020-3-12 17:23

fengvhong 发表于 2012-5-15 16:32
嗯，很好！可惜我是英盲

看不懂啊啊啊啊

[船装] 锚链标记问题