关于油管法兰贴防溅射胶带的问题？

Supernatural · 发表于 2012-4-5 14:38

如题所示，我找SOLas 硬是没找出来！有人能帮一把吗？

Supernatural · 发表于 2012-4-5 14:53

2.2.5.3 Oil fuel lines shall not be located immediately above or near units of high temperature, including
boilers, steam pipelines, exhaust manifolds, silencers or other equipment required to be insulated by
paragraph 2.2.6. As far as practicable, oil fuel lines shall be arranged far apart from hot surfaces, electrical
installations or other sources of ignition and shall be screened or otherwise suitably protected to avoid oil
spray or oil leakage onto the sources of ignition. The number of joints in such piping systems shall be kept
to a minimum.？？

Supernatural · 发表于 2012-4-5 14:54

这个只是说在一些必要的地方和条件下！！但是没有说 ALL

Supernatural · 发表于 2012-4-5 17:05

有高手找到些规范吗？

lmw0320 · 发表于 2012-4-5 23:16

本来就没有ALL，一般情况下只是压力大于一定值，且法兰位于电气控制箱或是其他热源附近时，才需要贴防溅扎带

[轮机] 关于油管法兰贴防溅射胶带的问题？