查看: 1768|回复: 1
收起左侧

[船体] 请教:有关澳洲梯的几个问题

[复制链接]
发表于 2011-4-14 20:25 | 显示全部楼层 |阅读模式 来自: 中国北京
本帖最后由 shamodeyu 于 2011-4-14 20:35 编辑

关于AMSA Marine Orders/Part 32/Issue 2/Compilation No.1/Appendix 17 (27 June 2007),我有些疑问,请教坛内同业。
因为在办公室就写好了英文,就直接复制了。

为了便于答复和交流,我把excel附上,请在附件内答复。! Q&A_on_AMSA_App17 (2011.4.2).rar (103.25 KB, 下载次数: 37)
先谢谢!


The RuleQuestion/CommentReply
12.1 (a) the inclination of the ladder to the horizontal must exceed 70° except that, in way of sloping ends of holds in a bulk carrier, the ladder may be at a lesser angle to the horizontal for a length of ladder not exceeding 6 metres;Q1: not exceeding 6 metres is JUST a requirement to the ladders in way of sloping ends of holds?Q2: 6 metres is the length along the ladder or the vertical distance?
22.2 On ships built after 1 August 1998, the maximum vertical length between platforms of a vertical ladder outside a cargo space (for example in a crane pedestal) is 6 metres.Q3: No "the maximum vertical length between platforms of a vertical ladder is 6 metres" required in cargo space?
33 Inclined ladders
(Detailed rule omitted)
Q4: No "the maximum vertical length between platforms of a inclined ladder is 6 metres" required in cargo space?
44 Spiral stairways
(Detailed rule omitted)
Q5: No "the maximum vertical length between platforms of a spiral stairway is 6 metres" required in cargo space?
55 Note 2: There should be a gap of 35 mm behind the tread to minimise build up of material that may impair
the foothold.

Q6: The gap 35mm means the distance between any obstruction and the edge of step as shown in Figure a?
Figure a

file:///C:/DOCUME~1/SHAMOD~1/LOCALS~1/Temp/ksohtml/wps_clip_image-26558.png

or the distance between edge of the side frame and the edge of step as shown in Figure b?

Figure b

file:///C:/DOCUME~1/SHAMOD~1/LOCALS~1/Temp/ksohtml/wps_clip_image-9781.png
66 Landing platforms
(Detailed rule omitted)
Q8: Upper stool bottom of transverse bulkhead in a bulk carrier needs to be considered as a landing platform for ladder from upper deck?
77 (d) secured at its upper resting position, which position should be at least one metre below the top of the ladder: alternatively the ladder must be held steady while it is being used.
Q9: Is it correct to understand this requirement as indicated in picture below?
file:///C:/DOCUME~1/SHAMOD~1/LOCALS~1/Temp/ksohtml/wps_clip_image-18550.png
回复

使用道具 举报

龙船学院
 楼主| 发表于 2011-4-14 20:40 | 显示全部楼层 来自: 中国北京
刚刚才注意到下载会被论坛扣金钱,抱歉,实非我愿!
请至115网盘下载http://u.115.com/file/f03ff93840
烦劳!
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-9-29 17:25

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表