正式员工
- UID
- 22580
- 积分
- 943
- 金币
-
- 活跃
-
- 阅读权限
- 50
- 注册时间
- 2007-12-14
- 最后登录
- 1970-1-1
|
发表于 2011-3-25 13:01
|
显示全部楼层
来自: 中国上海
Performance Standards for Water Level Detectors on Bulk Carriers
APPENDIX, paragraph 2.2.1
2.2.1 The sensors should be located in a protected position that is in communication with
the aft part of the cargo hold such that the position of the sensor detects the level that is
representative of the levels in the actual hold space. These sensors should be located:
.1 either as close to the centreline as practible, or
.2 at both the port and starboard sides of the cargo hold.
Interpretation:
For ships having keel laid on or after 1 July 2004, if sensors are not placed within a distance
less than or equal to 1 corrugation space or 1 bulkhead vertical stiffener space from the
centreline, sensors are to be located at both the port and starboard sides of the cargo hold.
For ships having keel laid before 1 July 2004, if sensors are not placed within a distance less than or equal to B/6 from the centreline, sensors are to be located at both the port and starboard sides of the cargo hold. |
|