查看: 2321|回复: 6
收起左侧

[基础知识] 污水井的布置与舱长度有什么关系?

[复制链接]
发表于 2011-1-22 20:03 | 显示全部楼层 |阅读模式 来自: 中国江苏南京
散货船货仓长度大于多少米需要首尾都布置污水井?
回复

使用道具 举报

龙船学院
发表于 2011-1-22 21:13 | 显示全部楼层 来自: 中国上海
没有必然联系,像bv规范里面规定
where the bottom of the space, bottom plating or top of the double bottom slope down to the centreline by more than 5˚, at least two centreline suctions, i.e. one branch bilge suction and one direct suction, or

where the bottom of the space is horizontal or slopes down to the sides and in all passenger ships, at least two suctions, i.e. one branch bilge suction and one direct suction, on each side, and

one emergency bilge suction.
回复 支持 反对

使用道具 举报

发表于 2011-1-24 10:25 | 显示全部楼层 来自: 中国湖北襄阳
7米的时候都要布置....
回复 支持 反对

使用道具 举报

发表于 2011-1-24 21:44 | 显示全部楼层 来自: 中国上海
根据五度的那个要求应该可以算出来的吧
回复 支持 反对

使用道具 举报

 楼主| 发表于 2011-2-16 14:53 | 显示全部楼层 来自: 中国江苏南京
得到一个模糊的解释是舱长大于30m的需要在首尾部都布置污水井,但是找不到相关的资料,不知哪位大侠能够解惑???
回复 支持 反对

使用道具 举报

发表于 2011-2-19 11:26 | 显示全部楼层 来自: 中国广东广州
谢谢`~~
回复 支持 反对

使用道具 举报

 楼主| 发表于 2011-2-22 20:27 | 显示全部楼层 来自: 中国江苏南京
"6.4.4     Ships with holds over 30 m in length
  In holds greater than 30 m in length, bilge suctions are to be
  provided in the fore and aft ends. "
终于找到了。BV规范里有。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-9-29 16:20

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表