关于水雾灭火系统的自动启动和手动启动

luguangtong · 发表于 2010-10-28 20:19

1 谁能说说手动启动和自动启动的操作流程呀？感谢各位了

2 还有个问题就是水雾灭火泵控制器都接了个压力开关，压力开关我理解是当水雾施放管道水雾压力过大，压力开关动作，水雾灭火火灾报警板发出报警，对不对呀？？？

lvpeng986923 · 发表于 2010-10-28 21:19

[b]1.手动启动顾名思义，手动直接启动泵某个区域的探头开始喷雾
自动，当感温或者感焰探头中其一出现动作，警铃报警。值班人员发现某个区域后直接手动启动。
或者直到另外一个探头也动作，泵自动启动，该区域开始喷雾。
2.关于水雾灭火泵控制器上面开关可能是泵出口压力低报警。当然这个跟设备具体配置有关系。具体设备具体看这个压力开关的作用了。

aqwe · 发表于 2010-10-29 15:27

System Description:
Unitor Water Mist Fire Extinguishing System consists of high pressure pump unit and/or
cylinders, section valves, piping system and nozzle heads.
Its uniquely designed high pressure nozzles give flexible discharge patterns and capacity.
The nozzles are compact with no moving parts. The system has the market’s best design
parameters, largest nozzle spacing and lowest volumetric flow rate.
Water is supplied via a pump unit or cylinders depending on applications. Both are able
to supply all water mist applications onboard through the variety of different section
valves operated either remotely or manually.
A touch screen operational panel can be installed for easy operation and monitoring.
Unitor Water Mist Fire Extinguishing System is installed as a total flooding system or
local protection of high risk areas. It provides several methods for fire detection and
activation.
The system can be installed with glass bulb nozzles, which contains detection bulb glass
able to release the system automatically at early stage of a fire.
For accommodation areas, the system can be activated both automatically and manually.
For the protection of machinery spaces and local risk areas, system can be installed with
open nozzles with a detection system to operate manually for total flooding or local protection
of high risk areas. Additionally, protection for both the galley ducts and fat fryer
are available through a localised compact water system.
The system design is accepted by the rules and allows for the use of both fresh and
sea water.

nacksyjt · 发表于 2010-10-29 15:58

本帖最后由 nacksyjt 于 2010-10-29 16:21 编辑

回复 1# luguangtong

附件中是DESMI FINEFOG 机舱水雾系统的介绍，你看完，这些问题就知道了。

船厂打工仔 · 发表于 2010-10-31 16:07

主机上面喷雾了比较好看不过那么点水不起作用呵呵

dadeoo7 · 发表于 2011-12-28 10:08

资料很不错

ericcx · 发表于 2011-12-30 16:00

韩国有一家专做这个的好几种

cz_hhh · 发表于 2012-1-5 13:04

look look

millert · 发表于 2012-1-5 14:35

回复 5# 船厂打工仔

这个水雾很厉害的。。。关键不在于水的多少，而在于水雾直径大小和覆盖面积，比一般的喷水灭火能够节省80～90%的水。

sy123 · 发表于 2012-1-5 20:26

学习了

雪狼127 · 发表于 2012-5-30 14:45

资料很不错

a303120140 · 发表于 2013-12-24 14:40

钱不够了

a303120140 · 发表于 2013-12-24 14:42

学习学习

[轮机] 关于水雾灭火系统的自动启动和手动启动

评分