BV无损探检测

ghtghtghtao · 发表于 2011-2-23 14:18

各位好，小弟现需要做无损探伤的送审图，想咨询一下BV 无损探伤检测点的计算公式，和在BV规范的哪章节里。非常感谢！！！！！

ghtghtghtao · 发表于 2011-2-23 14:57

有高人知道吗，非常感谢！！！！！！

youngfp · 发表于 2011-6-16 22:12

回复 2# ghtghtghtao

没有计算公式，有计算公式那是CCS规范，和船舶行业标准，
BV要求：Part B，Chapter 12，Section1，6 Inspections and checks

ABS要求：Guide for Non-constructive Inspection of Hull Welds，Appendix I, Extent and Location of RT or UT

CCS要求：船舶焊接检验指南，第7章，第2节，7.2.2 无损检测的数量

DNV要求：Classification Note No.7 NDT 1.7 Extent of testing
The extent of testing shall be given in the relevant parts of the Rules or drawings or as agreed between the manufacturer and the Society. The extent of NDT shall be increased if repeated occurrence of cracks or other significant weld defects are revealed. Corrective actions shall be taken to ensure that all similar defects will be detected. All welds shall be 100% visually tested prior to carrying out other NDT.

LR要求：Part 3，Chapter 10，Section 2，Table 10.2.6 Non-destructive examinations of welds

KR要求：Guidance Part 2，Chapter 2，Annex 2-7，Guidance for DNT of ship hull and welds

NK要求：Part M，Annex M1.4.2-3(1) Guidance for Non-Destructive Inspection on Welded Jionts of Hull Construction

IACS要求： Rec.20 Non-destructive testing of ship hull steel welds

3d船体 · 发表于 2012-4-20 12:13

非常感谢

sky2047 · 发表于 2012-6-11 16:38

youngfp 发表于 2011-6-16 22:12
回复 2# ghtghtghtao

很全面，收藏了

xyz001 · 发表于 2012-7-2 15:20

不同船级社的要求是不一样的

[规范类] BV无损探检测