Advanced, SCR-Friendly Semisubmersible FPU for Ultra-Deepwater

燕南雪 · 发表于 2008-6-21 14:04

Advanced, SCR-Friendly Semisubmersible FPU for Ultra-DeepwaterAtlantia’s new SCR-friendly semisubmersible FPU is the first ultra-deepwater structure designed specifically to produce acceptable stresses in large-diameter steel catenary risers.

1300x1500 (600k)
The design effort began with an exhaustive analysis of SCR motions and stresses, defining critical areas that are adversely affected by extreme motions. Atlantia engineers then developed a deep-draft hull design, drawing upon the expertise of SBM Offshore Group sister company GustoMSC-OceanDesign, an experienced designer of marine drilling rigs.
Instead of a conventional design approach driven by payload capacity, Atlantia focused on ways to limit motions that adversely affect SCRs and SCR connections. The result is a deep-draft, four-column, ring-pontoon hull design that will support large facilities while extending SCR fatigue life.
The deep-draft design was verified by thorough global analysis and model-testing performed in late 2003, and detailed engineering of the first 37,000-ton-displacement FPU hull for 8,000-ft-deep water has been completed.
[localimg=400,267]1[/localimg][localimg=400,267]1[/localimg]

[ 本帖最后由燕南雪于 2008-6-21 14:09 编辑 ]

燕南雪 · 发表于 2008-6-21 14:10

有张图片总传不上去

海上铁匠 · 发表于 2008-6-21 14:34

SBM-GustoMSC, 非常有实力的平台设计公司。
这样的一个新的设计，从设计到模型试验，至少要投资上百万美金。但只要卖一条就可收回成本。

zhengcy · 发表于 2008-11-9 10:22

不错不错

Advanced, SCR-Friendly Semisubmersible FPU for Ultra-Deepwater

为什么出不上去照片