查看: 5815|回复: 5
收起左侧

[总体] 请教船级符号有关问题

[复制链接]
发表于 2022-12-28 17:01 | 显示全部楼层 |阅读模式 来自: 中国辽宁大连
BV I ✠HULL✠MACH Deck ship,YOUNG ICE 2 ,Equipped for carriage of containers
Unrestricted navigation ,CPS(WBT),BWT, LI-HG-S1
请教高手解释一下“CPS(WBT),BWT, LI-HG-S1”是什么意思?
回复

使用道具 举报

龙船学院
发表于 2022-12-29 09:21 | 显示全部楼层 来自: 中国江苏无锡
CPS COATING PERFORMANCE STANDARD BWT BALLAST WATER TREATMENT ,后面的是不是关于装载计算机选项的
回复 支持 反对

举报

发表于 2022-12-29 16:08 | 显示全部楼层 来自: 中国江苏南通
参见章节
6.24.4  Coating performance standard CPS(WBT)
The additional class notation CPS(WBT) may be assigned to ships complying with the requirements of NR530 Coating Performance Standard.Note 1: For bulk carriers and oil tankers assigned with the additional service feature CSR and contracted for construction on or after 8 December 2006, and for ships complying with IMO resolution MSC.215(82), as amended, and contracted for construction on or after 1 July 2008, reference is made to [4.3.2] and [4.4.2] for the mandatory assignment of the additional service feature CPS(WBT).
回复 支持 反对

举报

发表于 2022-12-29 16:09 | 显示全部楼层 来自: 中国江苏南通
6.8.5  Ballast water treatment (BWT)
The additional class notation BWT is assigned to ships fitted with a Ballast Water Treatment plant in accordance with the provisions of Pt F, Ch 9, Sec 1 and Pt F, Ch 9, Sec 4.The requirements for the maintenance of this notation are given in Ch 5, Sec 8.
回复 支持 反对

举报

发表于 2022-12-29 16:11 | 显示全部楼层 来自: 中国江苏南通
6.16.1  Loading instrument
The additional class notations LI-HG, LI-S1, LI-S2, LI-S3, LI-S4, LI-HG-S1, LI-HG-S2, LI-HG-S3, LI-HG-S4 and LI-LASHING may be assigned to ships equipped with a loading instrument.The requirement for the assignment of these notations are given in Pt B, Ch 1, Sec 5.Note 1: When the ship is equipped with a loading instrument performing:•only hull girder calculations, the additional class notation LI-HG is assigned•only intact stability calculations (when the ship is not required to meet damage stability requirements), the additional class notation LI-S1 is assigned•intact stability calculations and damage stability on a basis of a limit curve, the additional class notation LI-S2 is assigned•intact stability calculations and direct damage stability calculations based on pre-programmed damage cases, the additional class notation LI-S3 is assigned•damage stability calculations associated with an actual loading condition and actual flooding case, using direct application of user defined damage, for the purpose of providing operational information for safe return to port (SRtP), the additional class notation LI-S4 is assigned•lashing calculations, the additional class notation LI-LASHING is assigned.When the loading instrument performs hull girder and stability calculations, one of the additional class notations LI-HG-S1, LI-HG-S2 or LI-HG-S3, LI-HG-S4 is assigned, as applicable.
回复 支持 反对

举报

发表于 2023-1-3 17:15 | 显示全部楼层 来自: 中国上海
感觉这符号这么眼熟呢,是不是佳豪设计的加班运输船?
回复 支持 反对

举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-12-16 01:40

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表