查看: 1437|回复: 3
收起左侧

[管系] USCG 对燃油注入管路实验要求

[复制链接]
发表于 2014-6-17 13:27 | 显示全部楼层 |阅读模式 来自: 中国江苏南通
USCG 对燃油注入管路实验要求
回复

使用道具 举报

龙船学院
发表于 2014-6-18 04:57 | 显示全部楼层 来自: 中国山东烟台
(b) Each fixed piping system required by paragraph (a) of this section must have: (1) At least two manifolds on the weather deck for transferring oily mix- tures to reception facilities, one of which is on the port side of the vessel and one of which is on the starboard side; and (2) Except as provided in paragraph (c) of this section, at least one dis- charge point that: (i) Is used for discharges to the sea;
(ii) Is on a port or starboard weather deck or on the vessel’s side above the waterline of its deepest ballast condi- tion; and (iii) Has an automatic stop valve that is actuated by a cargo monitor signal, except that manual valves may be pro- vided on new vessels of less than 4,000 tons deadweight and on existing ves- sels.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2014-6-18 14:44 | 显示全部楼层 来自: 中国江苏南通
楼上的朋友  我是想问USCG 对燃油注入管路密性实验要求:实验时间 压力 实验 介质 是如何规定的 ?
回复 支持 反对

使用道具 举报

发表于 2014-7-7 09:37 | 显示全部楼层 来自: 中国江苏南通
shipbuilderwb 发表于 2014-6-18 04:57
(b) Each fixed piping system required by paragraph (a) of this section must have: (1) At least two m ...

4000吨以上的船要有自动控制的阀门?
这个怎么理解????
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-9-29 14:25

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表