公约中关于人孔有什么规定?

王者到达 · 发表于 2008-3-12 22:37

人孔的高度是不是有具体的规定?还有大小是不是有规定?我们现在改装的船上出现这样一个问题,图上画的开人孔位置不够开一个800*600的人孔,船检说如果不一致的话船到其它港口,可能遭到扣船处理!想知道具体的细节!

xiaoniu · 发表于 2008-3-12 23:50

没有逃生用途的话，solas中，用作结构检验通道的，水平人孔最小要求600*600，垂向人孔要求最小800*600

xiaoniu · 发表于 2008-3-12 23:56

如果人孔中心高度大于600mm,还要装踏步和拉手

xiaoniu · 发表于 2008-3-12 23:57

Chapter II-1, Part A-1

5.1 For access through horizontal openings, hatches or manholes, the dimensions shall be sufficient to
allow a person wearing a self-contained airbreathing apparatus and protective equipment to ascend or
descend any ladder without obstruction and also provide a clear opening to facilitate the hoisting of an injured
person from the bottom of the space. The minimum clear opening shall not be less than 600 mm 6 600 mm.
When access to a cargo hold is arranged through the cargo hatch, the top of the ladder shall be placed as
close as possible to the hatch coaming. Access hatch coamings having a height greater than 900 mm shall
also have steps on the outside in conjunction with the ladder.
5.2 For access through vertical openings, or manholes, in swash bulkheads, floors, girders and web
frames providing passage through the length and breadth of the space, the minimum opening shall be not
less than 600 mm x 800 mm at a height of not more than 600 mm from the bottom shell plating unless
gratings or other foot holds are provided.

王者到达 · 发表于 2008-3-13 22:51

谢谢，以上各位的回答！

hyfei2000 · 发表于 2008-3-27 19:57

原帖由 xiaoniu 于 2008-3-12 23:56 发表
如果人孔中心高度大于600mm,还要装踏步和拉手

是距开口底600mm吧

rexchang · 发表于 2008-4-18 17:32

学习学习，啊哈哈

fzhrxy · 发表于 2008-4-18 19:14

只要每一个空间有一个大的就可以了
油船/散货船

sun451 · 发表于 2008-4-18 19:33

没事他扣你一艘我们CCS对扣两艘哈哈

ericcx · 发表于 2008-4-19 07:44

学习了！！！

zhangyi3330 · 发表于 2008-6-7 11:47

就只有solas公约里规定么？

niming0102 · 发表于 2008-6-7 11:56

原帖由 sun451 于 2008-4-18 19:33 发表
没事他扣你一艘我们CCS对扣两艘哈哈

看来哥们是船检局局长的儿子啊

有你在我们就踏实的糙船了

月落烏啼 · 发表于 2008-6-9 15:02

学习了