我公司求购油驳，具体要求如下：
Ideal specification in connection with the oil barges is as follows
o Engine- 2x1000 BHP o Maxm. Length- 100m o Maxm. Beam-16m o Maxm. Draft-4m o DWT at 4m draft-3500-4000MT o Twin screw, double bottom, double hull, full class vessel o No specific auxiliary power requirement o 2 screw p/p with a discharge rate of 500 M3/hr. · Vessel to be offered should be less than 15 years old or younger. · With each vessel offered it is IMPORTANT that info of fuel consumptions / lub consumptions in various conditions (ballast / part load (4 meters) draft / full load) is mentioned to deduce the operational cost. | 
发表于 2012-3-21 19:24
提升卡
变色卡
