本帖最后由 ilgx 于 2011-8-17 14:44 编辑
本人手上有一条拖船需要设计,基本规格要求如下:
Type of vessel: Tug
Classification: BV
Notations: Salvage tug; Fifi-1: -water spraying;Escort Tug;
Material: Steel
Length overall: 32.50 meters
Length bp: 27.60 meters
Moulded breadth: 11.70 meters
Depth: 5.60 meters
Design draft: 4,30 meters
Tonnage: 463 GRT
Engine: 2xCaterpillar 3516 B , each 2100kW at 1600rpm
Propulsion: Azimuth
Speed: 13 knots
Bollard pull: 67.2 tonnes ahead
Auxiliaries: 2 x Caterpillar C9 150 kW each
Combined anchor and escort winch(fore deck): Brake holding load 200 T 1st layer
Towing winch(aft deck): Brake holding load 130 T 1st layer
Reel winder: MacGregor Plimsoll ESW/SD-03 400m drum capacity
Towing hook: Data, type DTH 70-130 , 70 tonnes SWL
Stern roller: SWL 130 T
Crane
Fire Fighting: Fire Fighting Systems / FIFI-1
Fi-fi monitors: FFS, 2x1200/300 Water/Foam monitors
Foam capacity: 25 m³
Fuel capacity: 245 m³
Freshwater capacity: 53 m³
Navigation/communication: Unrestricted navigation area A3
Crew: 10 (6/3)如有人或公司可以做,麻烦发邮件到corrine.gx@gmail.com |