981设备清单-仅供参考（26）

DRAWING

K-POS OS 1, KM 05,Deep line	650*1149.6*1013.3mm IP22 250W Black, White Alu.	1
K-POS OS 2, KM 05,Deep line	650*1149.6*1013.3mm IP22 250W Black, White Alu.	1
K-POS OS 3, KM 05,Deep line	650*1149.6*1013.3mm IP22 250W Black, White Alu.	1
DPC 3 ,Triple Controller Cabinet	800*1600*400 IP44 RAL 7035	1
Alarm Printer no.1,HP K5400dn	495x466x207	1
Network Printer no.2,HP Inkjet2105N	558x420x293 IP22	1
The K-POS backup DP back up
K-POS OS 4, KM 05,Deep line	650*1149.6*1013.3mm IP22 250W Black, White Alu.	1
DPC 1 ,Single Controller Cabinet	800 x 1200 x 404 IP44 RAL 7035	1
Isolation Box	600x600x210 IP56 Grey (RAL 7035)	1
Alarm Printer 3,OKI280ML	372x80x275	1
The Slave Monitor 20"	534x481x73	1
The K-POS Data Log
K-POS OS 5, Data log , KM 05,Deep line	650*1149.6*1013.3mm IP22 250W Black, White Alu.	1
K-POS Simulator
K-POS OS 6, KM 05,Deep line	650*1149.6*1013.3mm IP22 250W Black, White Alu.	1
DP Alert System
DP alert remote panel	200x110x73.5 IP65	10
DP Alert Column , Zone1/2	IP66	8
Alert Horn, Sounder (EX)	IP66	8
Wind sensors & displays
Wind sensor GILL w/2m cable	Φ210x405 IP66 76W	3
Wind sensor GILL junction box	130x120.4x80 IP67	3
Gill Wind Display 230VAC, OMC-139	144*144*94 20W flush mount	3
MRU（motion reference unit)
MRU-5 Roll, Pitch & Heave sensor	Φ105 x204 14.5W IP66	3
MRU Wall mounting bracket(1)	265x119x119	3
MRU Junction Box MRU-E-JB1 Seatex	226x126x90 IP65	3
Gyro compass system
Gyro, NAVIGATE X MK.1	420x 520x404 80W IP23	3
Gyro Switch Over Unit	550x300x100 IP23	1
Compass Monitor NAVITWIN IV	319x127x110 IP56	1
Course and Rudder Angle Recorder	385x338x153	1
Steering Repeater	192x192x150 IP66	1
Bearing Repeater	385x338x153	2
Digital Repeater (Bulkhead)	158x155x154 7W (IP65/23)	8
Digital Repeater (Flush)	96x96x104(IP65/23)	4
Rate Of Turn Indicator	144x144x71 IP56	1
Splitter cabinet for gyro system	600*200*400	1
HIPAP
HIPAP NO.1 / HIPAP 500 (PORT)
Transceiver Unit HiPAP500 Complete w/KIT-213098 Dual Net &Fibre interface	687*594*823 250W IP44	1
Hoist Control Unit (TRx32 Kit)	300x400x210 IP54	1
Hull Unit HiPAP	NA	1
Gate Valve (F=500mm/ DNV&ABS)	1660x350x670	1
Mount. Flange (Ø:500mm/h:600mm, DNV&ABS)	(Ø:500mm/h:600mm)	1
Multifunction position transponder 331	NA	5
SSBL position transponder 331	NA	1
HIPAP NO.2 / HIPAP 500 (Starboard)
Transceiver Unit HiPAP500 Complete w/KIT-213098 Dual Net &Fibre interface	687*594*823 250W IP44	1
Hoist Control Unit (TRx32 Kit)	300x400x210 IP54	1
Hull Unit HiPAP	NA	1
Gate Valve (F=500mm/ DNV&ABS)	1660x350x670	1
Mount. Flange (Ø:500mm/h:600mm, DNV&ABS)	(Ø:500mm/h:600mm)	1