请问高手一级管子可以用弯头连接或套管连接吗

x92058 · 发表于 2010-8-27 16:46

chin_bingjun · 发表于 2010-8-27 16:53

弯头连接

renchao · 发表于 2010-8-27 17:06

可参见ccs规范第二章，第三篇，上边有说明。

wangyongqi · 发表于 2010-8-27 17:40

可以参照下BV规范
The junctions between metallic pipe lengths or between
metallic pipe lengths and fittings are to be made by:
• direct welding (butt-weld, socket-weld)
• bolted flanges (welded-on or screwed-on)
• threaded sleeve joints, or
• mechanical joints (see [2.4.5]).
The joints are to comply with a recognised standard or
to be of a design proven to be suitable for the intended
purpose and acceptable to the Society.The expression "mechanical joints" means devices
intended for direct connection of pipe lengths other
than by welding, flanges or threaded joints
具体的在附件的表格中有说明

汤臣一品 · 发表于 2010-8-27 18:35

学习啦

卧龙 · 发表于 2010-8-27 19:12

都可以！小管用套管的多！大管用弯头的多！

huangpei5731 · 发表于 2010-8-27 19:36

可以用弯头和套管，但是应该是锻造件插入式的

x92058 · 发表于 2010-8-29 10:30

感谢各位前辈指教

leeyang1983 · 发表于 2010-8-29 18:19

可以

shuirutian · 发表于 2010-8-30 07:14

回复 1# x92058

各船级社要求不一

winds · 发表于 2010-8-30 07:47

都可以

hwy1985 · 发表于 2010-8-30 15:32

学习啦……

[管系] 请问高手一级管子可以用弯头连接或套管连接吗