查看: 2674|回复: 2
收起左侧

SPSS什么的缩写?关于painting

[复制链接]
发表于 2007-9-21 09:26 | 显示全部楼层 |阅读模式 来自: 日本
St 3 of ISO 850 1-1 (Pt 3 of SPSS) for outside shell, inside of water
ballast tanks and fresh water tanks.
回复

使用道具 举报

龙船学院
发表于 2007-9-21 10:35 | 显示全部楼层 来自: 中国山东烟台
ISO 8501-1 :1988/Suppl :1994
preparation of steel substrate before application of paints and related products---visual assessment of surface cleanliness.

不知道缩写怎么来的???

预处理阶段PSP (Primary surface preparation)的时候会用到这个标准里的要求.

在二次处理(Secondary surface preparation )阶段,涉及的要求:

Surface treatment
Sa 2½ on damaged shop primer and welds.Sa 2 removing at least 70% of intact shop primer, which has not passed a pre-qualification certified by test procedures in .1.c.If the complete coating system comprising epoxy based main coating and shop primer has passed a pre-qualification certified by test procedures in .1.c, intact shop primer may be retained provided the same epoxy coating system is used. The retained shop primer shall be cleaned by sweep blasting, high pressure water washing or equivalent method.If a zinc silicate shop primer has passed the pre-qualification test of .1.c as part of an epoxy coating system, it may be used in combination with other epoxy coatings certified under .1.c, provided that the compatibility has been confirmed by the manufacturer by the test in accordance with paragraph 1.7 of appendix 1 to annex 1 without wave movement.
Surface treatment after erection
Butts St 3 or better or Sa 2½ where practicable. Small damages up to 2% of total area: St 3. Contiguous damages over 25 m2 or over 2% of the total area of the tank, Sa 2½ should be applied.Coating in overlap to be feathered.

回复 支持 反对

使用道具 举报

发表于 2007-9-22 17:29 | 显示全部楼层 来自: 中国江苏南通
不知道SPSS缩写的意思,与ISO8501-1的St3标准对应的是JSRA(Japanese Ship Research Association)的Pt3,或者是SSPC(Steel Structure Painting Council)的SP 11。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

小黑屋|标签|免责声明|龙船社区

GMT+8, 2024-9-20 00:34

Powered by Imarine

Copyright © 2006, 龙船社区

快速回复 返回顶部 返回列表