|
|
发表于 2008-6-21 20:52
|
显示全部楼层
来自： 中国浙江台州
卡特彼勒3612,描述
5520MHP (4060bkw)Maximum Continuous (MC Rating) 连续的(MC 规定值) @ 1000 RPM
4 Cycle（周期）, 12 Cylinder（汽缸）
280mm Bore（排量） x 300mm Stroke（冲程）
222 Liter Displacement
222 公升排水量
Air Inlet System（进气口系统）
Air inlet adapter (vertical) 进气口适配器(垂直)
Air Cleaner Heavy Duty with service indicators（空气滤清器耐用与服务显示）
Crankcase Base Breather (top mounted) vented to outside) 齿轴箱基础的换气装置
Air Intake Silencer（进气孔消声器）
Cooling System`（冷却系统）
Single cooling system for Jacket water system（唯一冷却系统为外罩水系统）
Single circuit for aftercooler system唯一电路为二次冷却器系统
Two oil cooling elements二个机油冷却原理
Thermostats for separate cooling system温变自动启闭装置为分开的冷却系统
Aftercooler thermostats for 30 degree C temperature control
二次冷却器温变自动启闭装置为30 摄氏度温度控制
Jacket water heater connections and 6KW heater installed on engine
外罩水加热器连接和6KW 加热器被安装在引擎上
Remote Expansion Tank with sight glass, pressure cap and air vent (shipped loose)
遥控的扩展槽与瞄准望远镜、压力和通风孔(运输散装)
Engine Jacket Water Cooling connections to be determined (left or right side of engine)
引擎夹克水冷却连接被确定(引擎的左边或右边边)
Emergency Water connections
紧急水连接
Note: 注释：
• Antifreeze/coolant conditioner to be supplied and installed by others
• 发动机防冻液/冷却液 调节剂由其他人供应和安装
• Equipped for keel cooling.
• 装备为龙骨冷却
• If heat exchanger cooling is required, loose heat exchanger needs to be priced with pump and lines group
• 如果热转换器冷却必需, 宽松热转换器需要可比较以水泵和行组
Exhaust System排气系统
Dry, gas tight, exhaust manifold
烘干, 气体紧紧, 尾气多头管
Hard Exhaust Manifold Shields
坚硬尾气多头管盾
Technical: Shielding constructed of a steel outer cover with high temperature insulation and an inner
技术: 保护被修建钢外面盖子与高温绝缘材料和内在
foil lining. Joints are bolted for serviceability.
箔衬里。联接被闩上为操作性能。
Accepted by all marine societies
由所有海洋社会接受
Vertical exhaust outlet adapter with accessories
垂直的尾气出口适配器与辅助部件
Exhaust Flex (18”) 尾气导电线(18”)
Exhaust Expander (14” to 18”) 尾气扩展器(14” 到18”)
Note: 注:
• Mufflers (supplied others) • 消声器(被供应其他人)
Fuel System燃料系统
Distillate fuel (heavy fuel not available)使用轻柴油（重油不可用）
Manual priming fuel pump手动起动燃油泵
Duplex (engine mounted) Fuel Filters双向（安在引擎上) 燃料过滤器
Duplex Fuel Strainer primary (remote mounted) shipped loose
双重燃料过滤器主要(安遥控上) 散装运输
Emergency Fuel Connections紧急燃料连接
Flexible Fuel Connections柔软的燃料连接
Fuel Transfer Pump c/w pressure relief and regulating valves
燃料转换泵浦c/w 压力减轻和调控的阀门
Governor调速器
Woodward GP723 Plus governor
Woodward GP723 加调速器
Technical: 技术:
Provides speed governing for variable or fixed engine speeds, including engines with flexible
提供快速变速或固定变速，包括引擎灵活性
couplings, and fixed or controllable pitch propellers. Includes inputs for two magnetic pickups, lube
一对, 可调速的推进器。包括输入为二磁性搭便车, 润滑油
oil pressure, an input for water pressure, an input for remote speed reference, and an input for air inlet manifold pressure. Designed to meet marine society requirements. Consist of engine driven UG
hydra-electric actuator, engine mounted speed pickup and a ship loose governor control group for remote mounting by customer. Use with Single or dual engines driving into one propeller.
Requires 24 VDC or 120 VDC power.
Flywheel
SAE standard rotation (counter clockwise as viewed from the rear looking forward)
Standard Flywheel, standard bolt hole pattern
Torsional coupling (to be determined from Caterpillar Torsional Analysis)
Manual Barring Device 50:1
Mounting System
Mounting feet spring and rubber (Resilient mounted) Factory specified and supplied
Technical:
• 616 mm (24.25 in.) below crankshaft centerline
• Six mounting feet are used on the engine.
• Mounting feet are made from aluminum alloy
Lubrication System
Centrifugal Oil Filters with single shutoff
Duplex Oil Filters
West Oil Sump
Engine driven main lubricating oil pump
Air operated pre-lubrication pump
Temperature regulated oil cooler
Manual Drain Valve
Emergency Lube Oil connections
Customer to supply oil (Caterpillar to recommend type)
Starting System
Air starting motor – vane type
Pressure Reducing Valve (max. 450psi)
Silencer, lubricator, air strainer, shutoff valve and flex hose
Control panel for pre-lube, customer mounted
Protection System
ECP Relay System (customer mounted)
Maximum protection: customer mounted
Functions include:
Shutdowns: Electrical overspeed, low oil pressure (low & high rpm), high
crankcase pressure, metal particle detector, loss of jacket water
detection, high oil temperature and high jacket water temperature.
Alarms:
Low oil pressure (low & high speed), loss of jacket water detection,
high oil temperature, high jacket water temperature, high inlet air
manifold temperature, high exhaust manifold temperature, metal
particle detector, low oil level, low coolant level, high fuel
temperature, low starting air pressure, low fuel pressure, low jacket
water pressure and low AC/OC pressure.
REQUIRES: 24 VDC power
Factory upgraded wiring
Wiring for typical engine controls is routed through engine mounted,
marine society approved cable trays, and terminated at engine mounted
junction box on the non-service side of engine.
Customer to provide connection from engine junction box to control panel.
Wiring will meet waterproof or severe service requirements.
Crankcase Explosion Relief Valves
Oil Mist detector
Pyrometers and Thermocouples
Individual cylinder exhaust temperature thermocouples and wiring. A modularized system with thermo well and pyrometer pipe for wiring. This system has individual exhaust and stack temperature sensors. The system provides protection mechanically and electronically. All
connections utilize insulated screw type connectors. All wiring is protected by armored cabling or steel tubing, and the entire system incorporates shielding to eliminate effects of electrical noise. The
modularized system is designed to perform to the highest quality and industry standards, increase serviceability, and perform to applicable quality/reliability/accuracy standards.
Note:
• This system meets marine society approval.
General
CCS society approval not included
Engine lifting eyes
Paint Standard Caterpillar Enamel Yellow (optional colors available)
Tarpaulin covering engine for shipping
Front Crankcase Damper and Guard
Service Manual, Parts Books, Operating & Maintenance Manual
Price ……(each engine)…………….. $ 1,450,000.00 us funds
Terms and Clarification:
• The above price does not an allowance of a mechanic/electrician to perform start-up/sea trials and commissioning.
• Engineering and on site supervision not included in the price
• There is NO allowance in the above price to install and terminate electrical components and wiring on the vessel.
• Warranties, Terms and Conditions can be supplied upon request.
• Engine Technical Data and drawings will be supplied upon request.
• Taxes are not included
• Delivery: Approximately 4 to 6 months
• Freight: to be determined. Freight charges are not included in the price.
• Payment: 20% on order confirmation and signing of the sales order, 10% before engines leave Canada and 70% upon arrival to Shanghai seaport (final destination)
• This Proposal is valid for 20 days
• Prices are in US Funds
Finning Power Systems
Nairn Grundy
Marine Engine Sales |
|
提升卡
变色卡
